GW Instek MFG-2000 Series Multi-channel Function Generator
Product model selection
The entire MFG-2000 series has 10 models. The specific functions for each model are as follows:
MFG-2000 series specific functions | ||||||
| CH1 | CH2 | 25MHz Pulse Generator | RF Generator | Power Amplifier | Modulation/Sweep |
Function With ARB | Function With ARB | |||||
MFG-2110 | ●10MHZ |
| ● |
|
|
|
MFG-2120 | ●20MHZ |
| ● |
|
|
|
MFG-2120MA | ●20MHZ |
| ● |
| ● | ● |
MFG-2130M | ●30MHZ |
| ● |
|
| ● |
MFG-2160MF | ●60MHZ |
| ● | ●160MHZ |
| ● |
MFG-2160MR | ●60MHZ |
| ● | ●320MHZ |
| ● |
MFG-2230M | ●30MHZ | ●30MHZ | ● |
|
| ● |
MFG-2260M | ●60MHZ | ●60MHZ | ● |
|
| ● |
MFG-2260MFA | ●60MHZ | ●60MHZ | ● | ●160MHZ | ● | ● |
MFG-2260MRA | ●60MHZ | ●60MHZ | ● | ●320MHZ | ● | ● |
The MFG-2000 series can maximally and simultaneously output five functional channels. The functionalities of each channel are as follows:
Channel 1 | 1uHz-60MHz | AM ,FM ,PM,FSK |
|
Channel 2 |
| ||
RF | 1uHz-320MHz | ASK,PSK | |
Pulse | 25MHz Full Function pulse Generator | ||
Power | 20W Power Amplifier |
Detail of MFG-2000 Specifications.
CH1/ CH2
Arbitrary Functions |
|
|
| ||||||||||||
| ARB function | Built-in | |||||||||||||
| Sample Rate | 200 MSa/s | |||||||||||||
| Repetition Rate | 100MHz | |||||||||||||
| Waveform Length | 16k points | |||||||||||||
| Amplitude Resolution | 14 bits | |||||||||||||
| Non-Volatile Memory | 10sets 16k points(1) | |||||||||||||
| User-defined output section | From point 2~16384 | |||||||||||||
| User-defined output marker section | From point 2 ~ 16384 | |||||||||||||
| Output mode | 1~1048575 cycles or infinite mode | |||||||||||||
Frequency Characteristics |
|
|
| ||||||||||||
| Range | Sine | 60MHz(max) | ||||||||||||
|
| Square | 25MHz(max) | ||||||||||||
|
| Triangle, Ramp | 1MHz | ||||||||||||
| Resolution |
| 1μHz | ||||||||||||
| AccuracyStability | ±20 ppm | |||||||||||||
| Aging | ±1 ppm, per 1 year | |||||||||||||
| Tolerance | ≤1μHz | |||||||||||||
Output Characteristics(2) |
|
|
| ||||||||||||
| AmplitudeRange | 1mVpp to 10 Vpp (into 50Ω) 2mVpp to 20 Vpp (open-circuit) | |||||||||||||
| Accuracy | ±2% of setting ±1 mVpp (at 1 kHz/into 50Ω without DC offset)) | |||||||||||||
| Resolution | 0.1mV or 4 digits | |||||||||||||
| Flatness | ± 1% (0.1dB) ≦1MHz ± 3% (0.3dB) ≦50 MHz ± 10% (0.9dB) ≦160MHz ± 30% (3dB) ≦320MHz (sinewave relative to 1 kHz/into 50Ω) | |||||||||||||
| Units | Vpp, Vrms, dBm | |||||||||||||
Offset | Range | ±5 Vpk ac +dc (into 50Ω) ±10Vpk ac +dc (Open circuit) | |||||||||||||
| Accuracy | 1% of setting + 5mV+ 0.5% of amplitude | |||||||||||||
Waveform Output | Impedance | 50Ω typical (fixed) > 10MΩ (output disabled) | |||||||||||||
| Protection | Short-circuit protected Overload relay automatically disables main output | |||||||||||||
| Ground Isolation | 42Vpk max | |||||||||||||
Sync Output | Range | TTL-compatible into>1kΩ | |||||||||||||
| Impedance | 50Ω standard | |||||||||||||
| Ground Isolation | 42Vpk max | |||||||||||||
Sine wave Characteristics(3) |
|
| |||||||||||||
| Harmonic distortion | –60 dBc DC~200kHz, Ampl>0.1 Vpp –55 dBc 200kHz~1 MHz, Ampl>0.1 Vpp –45 dBc 1MHz~10 MHz, Ampl>0.1Vpp –30 dBc 10MHz~320MHz, Ampl>0.1Vpp | |||||||||||||
| Total harmonic distortion | < 0.1% (Ampl>1Vpp)DC~100 kHz | |||||||||||||
Square wave Characteristics |
|
| |||||||||||||
| Rise/Fall Time | <15ns | |||||||||||||
| Overshoot | <5% | |||||||||||||
| Asymmetry | 1% of period +5 ns | |||||||||||||
| Variable duty Cycle | 0.01% to 99.99%(limited by the current frequency setting) | |||||||||||||
| Jitter | 20ppm+500ps(4) | |||||||||||||
Ramp Characteristics |
|
|
| ||||||||||||
| Linearity | < 0.1% of peak output | |||||||||||||
| Variable Symmetry | 0% to 100% | |||||||||||||
Pulse Characteristics |
|
| |||||||||||||
| Frequency | 1uHz~25MHz | |||||||||||||
| Pulse Width | ≧20nS(limited by the current frequency setting) | |||||||||||||
| Variable duty Cycle | 0.01%~99.99%(limited by the current frequency setting) | |||||||||||||
| Overshoot | <5% | |||||||||||||
| Jitter | 20ppm +500ps(4) | |||||||||||||
Pulse Generator |
|
| |||||||||||||
| Amplitude | 1mVpp to 2.5 Vpp (into 50Ω) 2mVpp to 5 Vpp (open-circuit) | |||||||||||||
| Offset | ±1 Vpk ac +dc (into 50Ω) ±2Vpk ac +dc (Open circuit) | |||||||||||||
| Frequency | 1uHz~25MHz | |||||||||||||
| Pulse Width | 20nS~999.9ks(limited by the current frequency setting) | |||||||||||||
| Variable duty Cycle | 0.01%~99.99%(limited by the current frequency setting) | |||||||||||||
| Leading and Trailing Edge Time(5) | 10nS~20S(1ns resolution) (limited by the current frequency and pulse width settings) | |||||||||||||
| Overshoot | <5% | |||||||||||||
| Jitter | 100ppm +500ps(4) | |||||||||||||
RF Generator |
|
| |||||||||||||
Arbitrary Functions |
|
|
| ||||||||||||
| ARB function | Built-in | |||||||||||||
| Sample Rate | 200 MSa/s | |||||||||||||
| Repetition Rate | 100MHz | |||||||||||||
| Waveform Length | 16k points | |||||||||||||
| Amplitude Resolution | 14 bits | |||||||||||||
| User-defined output section | From point 2~16384 (optional) | |||||||||||||
| Jitter | 20ppm +5ns | |||||||||||||
Frequency Characteristics |
|
|
| ||||||||||||
| Range | Sine |
| ||||||||||||
|
| Square | 25MHz(max) | ||||||||||||
|
| Triangle, Ramp | 1MHz | ||||||||||||
| Resolution |
| 1μHz | ||||||||||||
| AccuracyStability | ±20 ppm | |||||||||||||
| Aging | ±1 ppm, per 1 year | |||||||||||||
| Tolerance | ≤1μHz | |||||||||||||
Output Characteristics(2) |
|
|
| ||||||||||||
| Amplitude(into 50Ω) | 1mVpp to 2 Vpp (MFG-2XXXMF) 1mVpp to 1 Vpp (MFG-2XXXMR) | |||||||||||||
| Accuracy | ±2% of setting ±1 mVpp (at 1 kHz/into 50Ω without DC offset)) | |||||||||||||
| Resolution | 0.1mV or 4 digits | |||||||||||||
| Flatness | ± 1% (0.1dB) ≦1MHz ± 3% (0.3dB) ≦50 MHz ± 10% (0.9dB) ≦160MHz ± 30% (3dB) ≦320MHz (sinewave relative to 1 kHz/into 50Ω) | |||||||||||||
Offset |
| ±1 Vpk ac +dc (into 50Ω) ±2Vpk ac +dc (Open circuit) | |||||||||||||
Waveform Output | Impedance | 50Ω typical (fixed) > 10MΩ (output disabled) | |||||||||||||
Sine wave Characteristics(3) |
|
| |||||||||||||
| Harmonic distortion | –60 dBc DC~200kHz, Ampl>0.1 Vpp –55 dBc 200kHz~1 MHz, Ampl>0.1 Vpp –45 dBc 1MHz~10 MHz, Ampl>0.1Vpp –30 dBc 10MHz~320MHz, Ampl>0.1Vpp | |||||||||||||
| Total harmonic distortion | < 0.1% (Ampl>1Vpp)DC~100 kHz | |||||||||||||
Square wave Characteristics |
|
| |||||||||||||
| Rise/Fall Time | <15ns | |||||||||||||
| Overshoot | <5% | |||||||||||||
| Asymmetry | 1% of period +5 ns | |||||||||||||
| Variable duty Cycle | 0.01% to 99.99%(limited by the current frequency setting) | |||||||||||||
| Jitter | 20ppm+500ps(4) | |||||||||||||
Ramp Characteristics |
|
|
| ||||||||||||
| Linearity | < 0.1% of peak output | |||||||||||||
| Variable Symmetry | 0% to 100% | |||||||||||||
Modulati0n/Sweep |
|
| |||||||||||||
| Modulation Type | AM,FM,PM,FSK,PWM (The detail same as CH1 modulation specification) | |||||||||||||
| Sweep type | Frequency | |||||||||||||
| Source | INT/EXT(INT only for AM,FM,PM, PWM) | |||||||||||||
PSK |
|
| |||||||||||||
| Carrier Waveforms | Sine, Square, Triangle, Ramp, Pulse | |||||||||||||
| Modulating Waveforms | 50% duty cycle square | |||||||||||||
| Internal Frequency | 2mHz to 1 MHz | |||||||||||||
| Phase Range | 0∘~360.0∘ | |||||||||||||
| Source | Internal / External | |||||||||||||
ASK |
|
| |||||||||||||
| Carrier Waveforms | Sine, Square, Triangle, Ramp, Pulse | |||||||||||||
| Modulating Waveforms | 50% duty cycle square | |||||||||||||
| Internal Frequency | 2mHz to 1 MHz | |||||||||||||
| AmplitudeRange | 0%~100.0% | |||||||||||||
| Source | Internal / External | |||||||||||||
Power Amplifier |
|
| |||||||||||||
| Input Impedance | 10KΩ | |||||||||||||
| Input voltage | 1.25Vpmax | |||||||||||||
| Working Mode | Constant Voltage | |||||||||||||
| Gain | 20dB | |||||||||||||
| Output Power (RL=8Ω) | 20W(Square) | |||||||||||||
| Output Voltage | 12.5Vpmax | |||||||||||||
| Output Current | 1.6Amax | |||||||||||||
| Rise/Fall Time | <2.5uS | |||||||||||||
| Full Power Bandwidth | 5Hz-100kHz | |||||||||||||
| Overshoot | 5% | |||||||||||||
| Total harmonic distortion | < 0.1% (Ampl>1Vpp) 20Hz~20 kHz | |||||||||||||
| Ground Isolation | 42Vpk max | |||||||||||||
Advanced Functions |
|
| |||||||||||||
AM Modulation |
|
| |||||||||||||
| Carrier Waveforms | Sine, Square, Triangle, Ramp, Pulse, Arb | |||||||||||||
| Modulating Waveforms | Sine, Square, Triangle,Upramp, Dnramp | |||||||||||||
| Modulating Frequency | 2mHz to 20kHz (Int)DC to 20kHz (Ext) | |||||||||||||
| Depth | 0% to 120.0% | |||||||||||||
| Source | Internal / External | |||||||||||||
FM Modulation |
|
|
| ||||||||||||
| Carrier Waveforms | Sine, Square, Triangle, Ramp | |||||||||||||
| Modulating Waveforms | Sine, Square, Triangle,Upramp, Dnramp | |||||||||||||
| Modulating Frequency | 2mHz to 20kHz (Int) DC to 20kHz (Ext) | |||||||||||||
| Peak Deviation | DC to max frequency |
| ||||||||||||
| Source | Internal / External | |||||||||||||
PM |
|
| |||||||||||||
| Carrier Waveforms | Sine, Square, Triangle, Ramp | |||||||||||||
| Modulating Waveforms | Sine, Square, Triangle, Upramp, Dnramp | |||||||||||||
| Modulation Frequency | 2mHz to 20kHz (Int) DC to 20kHz (Ext) | |||||||||||||
| Phase deviation | 0∘~360.0∘ | |||||||||||||
| Source | Internal / External | |||||||||||||
SUM |
|
| |||||||||||||
| Carrier Waveforms | Sine, Square, Triangle, Ramp | |||||||||||||
| Modulating Waveforms | Sine, Square, Triangle, Upramp, Dnramp | |||||||||||||
| Modulation Frequency | 2mHz to 20kHz (Int) DC to 20kHz (Ext) | |||||||||||||
| SUM depth | 0%~100.0% | |||||||||||||
| Source | Internal / External | |||||||||||||
PWM |
|
| |||||||||||||
| Carrier Waveforms | Sine, Square, Triangle, Ramp | |||||||||||||
| Modulating Waveforms | Sine, Square, Triangle, Upramp, Dnramp | |||||||||||||
| Modulation Frequency | 2mHz to 20kHz (Int) DC to 20kHz (Ext) | |||||||||||||
| Phase deviation | 0%~100.0% pulse width | |||||||||||||
| Source | Internal / External | |||||||||||||
FSK |
|
| |||||||||||||
| Carrier Waveforms | Sine, Square, Triangle, Ramp, Pulse | |||||||||||||
| Modulating Waveforms | 50% duty cycle square | |||||||||||||
| Internal Frequency | 2mHz to 1 MHz | |||||||||||||
| FrequencyRange | 1μHz to max frequency | |||||||||||||
| Source | Internal / External | |||||||||||||
Sweep |
|
|
| ||||||||||||
| Waveforms | Sine, Square, Triangle, Ramp | |||||||||||||
| Type | Linear or Logarithmic | |||||||||||||
| Sweep direction | Sweep up or sweep down | |||||||||||||
| Start/Stop Freq | 1uHz to max frquency | |||||||||||||
| Sweep Time | 1ms to 500s | |||||||||||||
| Source | Internal / External | |||||||||||||
| Trigger | Single, External, Internal. | |||||||||||||
| Marker | Marker signal on falling edge(programmable) | |||||||||||||
| Source | Internal / External | |||||||||||||
Burst |
|
| |||||||||||||
| Waveforms | Sine, Square, Triangle, Ramp | |||||||||||||
| Frequency | 1uHz~Max Frequency | |||||||||||||
| Pulse count | 1~1000000 Cycles or intfinite | |||||||||||||
| Start/ Stop Phase | -360.0∘~+360.0∘ | |||||||||||||
| Internal Frequency | 1 us~500 s | |||||||||||||
| Gate source | External Trigger | |||||||||||||
| Trigger Source | Single, External, Internal. | |||||||||||||
Trigger Delay | NCycle, Infinite | 0s~100 s | |||||||||||||
External Trigger Input |
|
|
| ||||||||||||
| Type | For FSK, Burst, Sweep | |||||||||||||
| Input Level | TTL Compatibility | |||||||||||||
| Slope | Rising or Falling(Selectable) | |||||||||||||
| Pulse Width | >100ns | |||||||||||||
| Input Impedance | 10kΩ,DC coupled | |||||||||||||
External Modulation Input |
|
|
| ||||||||||||
| Type | For AM, FM, PM,SUM,PWM | |||||||||||||
| Voltage Range | ±5V full scale | |||||||||||||
| Input Impedance | 10kΩ | |||||||||||||
| Frequency | DC to 20kHz | |||||||||||||
| Ground Isolation | 42Vpk max | |||||||||||||
Trigger Output |
|
|
| ||||||||||||
| Type | For FSK,Burst, Sweep | |||||||||||||
| Level | TTL Compatible into 50Ω | |||||||||||||
| Pulse Width | >450ns | |||||||||||||
| Maximum Rate | 1MHz | |||||||||||||
| Fan-out | ≥4 TTL Load | |||||||||||||
| Impedance | 50Ω Typical | |||||||||||||
Frequency Counter |
|
|
| ||||||||||||
| Range | 5Hz to 150MHz | |||||||||||||
| Accuracy | Time Base accuracy±1count | |||||||||||||
| Time Base | ±20ppm (23˚C ±5˚C) | |||||||||||||
| Resolution | The maximum resolution is: 100nHz for 1Hz, 0.1Hz for 100MHz. | |||||||||||||
| Input Impedance | 1kΩ/1pf | |||||||||||||
| Sensitivity | 35mVrms ~ 30Vms (5Hz to 150MHz) | |||||||||||||
| Ground Isolation | 42Vpk max | |||||||||||||
Dual Channel Function(CH1/CH2) |
|
|
| ||||||||||||
| Phase | -180∘ ~180∘ | |||||||||||||
|
| Synchronize phase | |||||||||||||
| Track | CH2=CH1 | |||||||||||||
| Coupling | Frequency(Ratio or Difference) | |||||||||||||
|
| Amplitude & DC Offset | |||||||||||||
| Dsolink | √ | |||||||||||||
Save/Recall |
| 10 Groups of Setting Memories | |||||||||||||
Interface |
| LAN(MFG 22XX Series only), USB | |||||||||||||
Display |
| 4.3’’ TFT LCD 480 × 3 (RGB) × 272 | |||||||||||||
General Specifications |
|
| |||||||||||||
| Power Source | AC100~240V, 50~60Hz or AC100~120V, AC220~240V, 50~60Hz | |||||||||||||
| Power Consumption | 30W or 80W(With power amplifier) | |||||||||||||
| Operating Environment | Temperature to satisfy the specification : 18 ~ 28˚C Operating temperature : 0 ~ 40˚C Relative Humidity: ≤ 80%, 0 ~ 40˚C ≤ 70%, 35 ~ 40˚C Installation category: CAT II | |||||||||||||
| Operating Altitude | 2000 Meters | |||||||||||||
| Pollution Degree | IEC 61010 degree 2, Indoor use | |||||||||||||
| Storage Temperature | -10~70˚C, Humidity: ≤70% | |||||||||||||
| Dimensions (WxHxD) | 266(W) x 107(H) x 293(D) mm | |||||||||||||
| Weight | Approx. 2.5kg | |||||||||||||
| Safety designed to | EN61010-1 | |||||||||||||
| Accessories | GTL-101× 1(MFG-21XX) GTL-101× 2(MFG-22XX) | |||||||||||||
|
| Quick Start Guide ×1 |