• GW Instek GSP-9330 High Test Speed Spectrum Analyzer

    $5,500.00

    Frequency

    Frequency

    Range

    9 kHz to 3.25 GHz

    Resolution

    1 Hz

    Frequency Reference

    Accuracy

    ±(period since last adjustment X aging rate) + stability over temperature + supply voltage stability

    Aging Rate

    ±1 ppm max.

    1 year after last adjustment

    Frequency Stability over Temperature

    ±0.025 ppm

    0 to 50 °C

    Supply Voltage Stability

    ±0.02 ppm

     

    Frequency Readout Accuracy

    Start, Stop, Center, Marker

    ±(marker frequency indication X frequency reference accuracy + 10% x RBW + frequency resolution)

    Trace points

    Max 601 points, min 6 points

    Marker Frequency Counter

    Resolution

    1 Hz, 10 Hz, 100 Hz, 1 kHz

    Accuracy

    ±(marker frequency indication X frequency reference accuracy + counter resolution)

    RBW/Span >=0.02 ;

    Mkr level to DNL>30 dB

    Frequency Span

    Range

    0 Hz (zero span), 100 Hz to 3.25 GHz

     

    Resolution

    1 Hz

     

    Accuracy

    ± frequency resolution1

    RBW: Auto;

    Phase Noise

    Offset from Carrier

     

    Fc =1 GHz; RBW = 1 kHz, VBW = 10 Hz; Average ≥ 40

    10 kHz

    <-88 dBc/Hz

    Typical

    100 kHz

    <-95 dBc/Hz

    Typical

    1 MHz

    <-113 dBc/Hz

    Typical

    Resolution Bandwidth (RBW) Filter

    Filter Bandwidth

    1 Hz to 1 MHz in 1-3-10 sequence

    -3dB bandwidth

    200 Hz, 9 kHz, 120 kHz, 1MHz

    -6dB bandwidth

    Accuracy

    ± 8%, RBW = 1MHz

    Nominal

    ± 5%, RBW < 1MHz

    Nominal

    Shape Factor

    < 4.5:1

    Normal Bandwidth ratio: -60dB:-3dB

    Video Bandwidth (VBW) Filter

    Filter Bandwidth

    1 Hz to 1 MHz in 1-3-10 sequence

    -3dB bandwidth

    Amplitude

    Amplitude Range

    Measurement Range

    100 kHz to 1 MHz

    Displayed Average Noise Level (DANL) to 18 dBm

    1 MHz to 10 MHz

    DANL to 21 dBm

    10 MHz to 3.25 GHz

    DANL to 30 dBm

    Attenuator

    Input Attenuator Range

    0 to 50 dB, in 1 dB step

    Auto or manual setup

    Maximum Safe Input Level

    Average Total Power

    ≤ +33 dBm

    Input attenuator 
    ≥10 dB

    DC Voltage

    ± 50 V

     

    1 dB Gain Compression

    Total Power at 1st Mixer

    > 0 dBm

    Typical;Fc  ≥ 50 MHz; preamp. off

    Total Power at the Preamp

    > -22 dBm

    Typical;Fc  ≥ 50 MHz; preamp. on

     

    mixer power level (dBm)= input power (dBm)-attenuation (dB)

    Displayed Average Noise Level (DANL)

    Preamp off

    0 dB attenuation; RF Input is terminated with a 50Ω load. RBW 10 Hz; VBW 10 Hz; span 500 Hz; reference level =  -60dBm; trace average ≥ 40

    9 kHz to 100 kHz

    < -93 dBm

    Nominal

    100 kHz to 1 MHz

    < -90 dBm - 3 x (f/100 kHz) dB

    1 MHz to 2.7 GHz

    < -122 dBm

    2.7 GHz to 3.25 GHz

    < -116 dBm

    Preamp on

    0 dB attenuation; RF Input is terminated with a 50Ω load ; RBW 10 Hz; VBW 10Hz; span 500 Hz;  reference level =  -60dBm; trace average ≥ 40

    100 kHz to 1 MHz

    < -108 dBm - 3 x (f/100 kHz) dB

    Nominal

    1 MHz to 10 MHz

    < -142 dBm

    10 MHz to 3.25 GHz

    < -142 dBm + 3 x (f/1 GHz) dB

    Level Display Range

    Scales

    Log, Linear

     

    Units

    dBm, dBmV, dBuV, V, W

     

    Marker Level Readout

    0.01 dB

    Log scale

     

    0.01 % of reference level

    Linear scale

    Level Display Modes

    Trace, Topographic, Spectrogram

    Single / split Windows

    Number of Traces

    4

     

    Detector

    Positive-peak, negative-peak, sample,  normal, RMS(not Video), Average(EMI), Quasi-Peak(EMI)

    Can be setup for each trace separately

    Trace Functions

    Clear & Write, Max/Min Hold, View, Blank, Average

     

    Absolute Amplitude Accuracy

    Absolute Point

    Center=160 MHz ; RBW 10 kHz; VBW 1 kHz; span 100 kHz; log scale;  1 dB/div; peak detector; 23°C±1°C; Signal at Reference Level

    Preamp off

    ± 0.3 dB

    Ref level 0 dBm; 
    10 dB RF attenuation

    Preamp on

    ± 0.4 dB

    Ref level -30 dBm; 
    0 dB RF attenuation

    Frequency Response

    Preamp off

    Attenuation: 10 dB; Reference: 160 MHz; 20 to 30°C

    100 kHz to 2.0 GHz

    ± 0.5 dB

     

    2GHz to 3.25 GHz

    ± 0.7 dB

     

    Preamp on

    Attenuation: 0 dB; Reference: 160 MHz; 20 to 30°C

    1 MHz to 2 GHz

    ± 0.6 dB

     

    2 GHz to 3.25 GHz

    ± 0.8 dB

     

    Attenuation Switching Uncertainty

    Attenuator setting

    0 to 50 dB in 1 dB step

     

    Uncertainty

    ± 0.25 dB

    reference: 160 MHz, 10dB attenuation

    RBW Filter Switching Uncertainty

    1 Hz to 1 MHz

    ± 0.25 dB

    reference : 10 kHz RBW

    Level Measurement Uncertainty

    Overall Amplitude Accuracy

    ± 1.5 dB

    20 to 30°C; frequency > 1 MHz; Signal input 0 to -50 dBm; Reference level  0 to -50 dBm; 
    Input attenuation 10 dB;  
    RBW  1 kHz; VBW 1 kHz; after cal; Preamp Off

    ± 0.5 dB

    Typical

    Spurious Response

    Second Harmonic Intercept

     

    Preamp off; signal input -30dBm; 0 dB attenuation

    +35 dBm

    Typical; 10 MHz < fc < 775 MHz

    +60 dBm

    Typical; 775 MHz ≤ fc < 1.625 GHz

    Third-order Intercept

     

    Preamp off; signal input -30dBm; 0 dB attenuation

    > 1dBm

    300 MHz to 3.25 GHz

    Input Related Spurious

    < -60 dBc

    Input signal level -30 dBm, Att.

    Mode, Att=0dB; 20-30ºC

    Residual Response (inherent)

    <-90 dBm

    Input terminated; 0 dB attenuation; Preamp off

    Sweep

    Sweep Time

    Range

    204 us to 1000 s

    Span > 0 Hz

    50 us to 1000 s

    Span = 0 Hz; Min Resolution = 10 us

    Sweep Mode

    Continuous; Single

     

    Trigger Source

    Free run; Video; External

     

    Trigger Slope

    Positive or negative edge

     

    RF Preamplifier

     

    Frequency Range

    1 MHz to 3.25 GHz

     

    Gain

    18 dB

    Nominal

     

    (installed as standard)

    Front Panel Input/Output

    RF Input

    Connector Type

    N-type female

     

    Impedance

    50 ohm

    Nominal

    VSWR

    <1.6 :1

    300 kHz to 3.25 GHz; Input attenuator ≥ 10 dB

    Power for Option

    Connector Type

    SMB male

     

    Voltage/Current

    DC +7V / 500 mA max

    With short-circuit protection

    USB Host

    Connector Type

    A plug

     

    Protocol

    Version 2.0

    Supports Full/High/Low speed

    MicroSD Socket

    Protocol

    SD 1.1

     

    Supported Cards

     microSD, microSDHC

    Up to 32GB capacity

    Rear Panel Input/Output

    Reference Output

    Connector Type

    BNC female

     

    Output Frequency

    10 MHz

    Nominal

    Output Amplitude

    3.3V CMOS

     

    Output Impedance

    50 ohm

     

    Reference Input

    Connector Type

    BNC female

     

    Input Reference Frequency

    10 MHz

     

    Input Amplitude

    -5 dBm to +10 dBm

     

    Frequency Lock Range

    Within ± 5 ppm of the input reference frequency

     

    Alarm Output

    Connector Type

    BNC female

    Open-collector

    Trigger Input/ Gated Sweep Input

    Connector Type

    BNC female

     

    Input Amplitude

    3.3V CMOS

     

    Switch

    Auto selection by function

     

    LAN TCP/IP Interface

    Connector Type

    RJ-45

     

    Base

    10Base-T; 100Base-Tx; Auto-MDIX

    USB Device

    Connector Type

    B plug

    For remote control only; supports USB TMC

    Protocol

    Version 2.0

    Supports Full/High/Low

    speed

    IF Output

    Connector Type

    SMA female

     

    Impedance

    50 ohm

    Nominal

    IF Frequency

    886 MHz

    Nominal

    Output level

    -25 dBm

    10 dB attenuation; RF input: 0 dBm @ 1 GHz

    Earphone Output

    Connector Type

    3.5mm stereo jack, wired for mono operation

    Video Output

    Connector Type

    DVI-I ( integrated analog and digital) , Single Link. Compatible with VGA or HDMI standard  through adapter

    RS232 Interface

    Connector Type

    D-sub 9-pin female

    Tx,Rx,RTS,CTS

    GPIB Interface (Optional)

    Connector Type

    IEEE-488 bus connector

     

    AC Power Input

    Power Source

    AC 100 V to 240 V, 50 / 60 Hz

    Auto range selection

    Battery Pack (Optional)

    Battery pack

    6 cells, Li-Ion rechargeable, 3S2P

    With UN38.3 Certification

    Voltage

    DC 10.8 V

     

    Capacity

    5200 mAh / 56Wh

     

    General

     

    Internal Data storage

    16 MB nominal

     

    Power Consumption

    <65 W

     

    Warm-up Time

    < 30 minutes

     

    Temperature Range

    +5 °C to +45 °C

    Operating

    -20 °C to + 70 °C

    Storage

    Weight

    4.5 kg (9.9 lb)

    Inc. all options (Basic+TG+GPIB+Battery)

    Dimensions

    210 x 350 x 100 (mm)

    Approximately

     

    8.3 x  13.8 x 3.9 (in)

     

    Tracking Generator (Optional)

     

    Frequency Range

    100 kHz to 3.25 GHz

     

    Output Power

    -50 dBm to 0 dBm in 0.5 dB steps

    Absolute Accuracy

    ± 0.5 dB

    @160 MHz, -10 dBm, Source attenuation 10 dB, 20 to 30°C

    Output Flatness

    Referenced to 160 MHz, -10 dBm

    100 kHz to 2 GHz

    ± 1.5 dB

    2 GHz to 3.25 GHz

    ± 2 dB

    Output Level Switching Uncertainty

    ± 0.8 dB

    Referenced to -10 dBm

    Harmonics

    < -30 dBc

    Typical, output level = -10 dBm

    Reverse Power

    +30 dBm max.

     

    Connector type

    N-type female

     

    Impedance

    50 ohm

    Nominal

    Output VSWR

    < 1.6:1

    300 kHz to 3.25 GHz, source attenuation ≥ 12 dB