GW Instek APS-7000 Series AC Power Supply
$2,370.00
| Model | APS-7050 | APS-7100 | APS-7200 | APS-7300 | |
| AC OUTPUT | |||||
| Power Rating | 500VA | 1000VA | 2000VA | 3000VA | |
| Output Voltage | 0 ~ 155Vrms, 0 ~ 310Vrms | ||||
| Output Frequency | 45.00 ~ 500.0 Hz | ||||
| Max. Current(rms) *1 | 0 ~ 155 Vrms | 4.2A | 8.4A | 16.8A | 25.2A |
| 0 ~ 310 Vrms | 2.1A | 4.2A | 8.4A | 12.6A | |
| Max. Current (peak) | 0 ~ 155 Vrms | 16.8A | 33.6A | 67.2A | 100.8A |
| 0 ~ 310 Vrms | 8.4A | 16.8A | 33.6A | 50.4A | |
| OPT. APS-003(rms) | 0 ~ 600 Vrms | 1.05A | 2.1A | 4.2A | 6.3A |
| OPT. APS-003(peak) | 0 ~ 600 Vrms | 4.2A | 8.4A | 16.8A | 25.2A |
| Total Harmonic Distortion (THD) *2 | ≤ 0.5% at 45 ~ 500.0Hz (Resistive Load) | ||||
| Crest factor | ≥ 4 | ||||
| Line regulation | 0.1% (% of full scale) | ||||
| Load regulation | 0.5% (% of full scale) | ||||
| Response time | < 100µS | ||||
| Reverse current | 30% of Maximum Output RMS Current (Continue) 100% of Maximum Output RMS Current (Within 3 minutes) | ||||
| SETTING | |||||
| Voltage | Range | 0 ~ 155Vrms, 0 ~ 310Vrms, Auto | |||
| Resolution | 0.01V at 0.00 ~ 99.99Vrms 0.1V at 100.0 ~ 310.0Vrms | ||||
| Accuracy | ± (0.5% of setting + 2 counts) | ||||
| Frequency | Range | 45 ~ 500 Hz | |||
| Resolution | 0.01Hz at 45.00 ~ 99.99Hz 0.1Hz at 100.0 ~ 500.0Hz | ||||
| Accuracy | ± 0.02% of Setting | ||||
| Power on/off phase angle | Range | 0 ~ 359° | |||
| Resolution | 1° | ||||
| Accuracy | ± 1° (Only 45 ~ 65Hz) | ||||
| Measurement *3 | |||||
| Voltage (rms) | Range | 0.20 ~ 38.75Vrms 38.76 ~ 77.50Vrms 77.51 ~ 155.0Vrms 155.1 ~ 310.0Vrms | |||
| Resolution | 0.01V at 0.00 ~ 99.99Vrms 0.1V at 100.0 ~ 310.0Vrms | ||||
| Accuracy *4 | ± (0.5% of reading + 2 counts) | ||||
| Frequency | Range | 45 ~ 500Hz | |||
| Resolution | 0.01Hz at 45.00 ~ 99.99Hz 0.1Hz at 100.0 ~ 500.0Hz | ||||
| Accuracy | ± 0.1Hz | ||||
| Current (rms) | Range | 2.00 ~ 70.00mA 60.0 ~ 350.0mA 0.300 ~ 3.500A 3.00 ~ 17.50A | 0.200 ~ 3.500A 3.00 ~ 35.00A | ||
| Resolution | 0.01mA 0.1mA 0.001A 0.01A | 0.001A 0.01A | |||
| Accuracy | ± (0.6% of reading + 5 counts) , 2.00 ~ 350.0mA ± (0.5% of reading + 5 counts) , 0.300 ~ 3.500A ± (0.5% of reading + 3 counts) , 3.000 ~ 17.50A | ± (0.5% of reading + 5 counts) , 0.200 ~ 3.500A ± (0.5% of reading + 3 counts) , 3.00 ~ 35.00A | |||
| Current (peak) | Range | 0.0 ~ 70.0A | 0.0 ~ 140.0A | ||
| Resolution | 0.1A | 0.1A | |||
| Accuracy | ± (1% of reading + 1 counts) | ± (1% of reading + 1 counts) | |||
| Power (W) | Resolution | 0.01W 0.1W 1W | 0.1W 1W | ||
| Accuracy | ± (0.6% of reading + 5 counts) , 0.20 ~ 99.99W ± (0.6% of reading + 5 counts) , 100.0 ~ 999.9W ± (0.6% of reading + 2 counts) , 1000 ~ 9999W | ± (0.6% of reading + 5counts) , 0.2 ~ 999.9W | |||
| Apparent Power (VA) | Resolution | 0.01VA 0.1VA 1VA | 0.1VA 1VA | ||
| Accuracy | ± (1% of reading + 7 counts) , 0.20 ~ 99.99VA ± (1% of reading + 7 counts) , 100.0 ~ 999.9VA ± (1% of reading + 5 counts) , 1000 ~ 9999VA | ± (1% of reading + 7 counts) , 0.2 ~ 999.9VA ± (1% of reading + 5 counts) , 1000 ~ 9999VA | |||
| Power Factor | Resolution | 0.001 | |||
| Accuracy | ±2% reading + 2 counts | ||||
| General | |||||
| Remote output signal | Pass, Fail, Test-in Process, Trigger in, Trigger out, OUT ON/OFF | ||||
| Sync output signal | Output Signal 10 V, BNC Type | ||||
| Number of Preset | 10 (0~9 numeric keys) | ||||
| Protection | OCP, OPP, OTP and Alarm | ||||
| Trigger Out | Maximum low level output = 0.8V Minimum high level output = 2V Maximum source current = 8mA. | ||||
| Trigger In | Maximum low level input voltage = 0.8V Minimum high level input voltage = 2.0V Maximum sink current = 8mA. | ||||
| SEQUENCE / SIMULATION FUNCTION | |||||
| Number of Memories | 10 (0~9 numeric keys) | ||||
| Number of Steps | 255 max. (for 1 sequence) | ||||
| Step Time Setting Range | 0.01 ~ 999.99 S | ||||
| Operation within Step | Constant, Keep, Linear Sweep | ||||
| Parameters | Ouptut Range, Frequency, Waveform (sine wave only), On Phase, Off Phase, Term Jump Count (0 ~255), Jump-to, Branch 1, Branch 2, Trigger Output | ||||
| Sequence Control | Start, Stop, Hold, Continue, Branch 1, Branch 2 | ||||
| AC Input | |||||
| Phase | Single Phase | ||||
| Input Voltage | 115/230Vac ± 15% | 230Vac ± 15% | |||
| Input Frequency | 50/60Hz | ||||
| Max. Current | 16A/8A | 32A/16A | 32A | 50A | |
| Power Factor | 0.7 Typ. | ||||
| Enviromental Conditions | |||||
| Operating temperature range | 0 ~ +40 ℃ | ||||
| Storage temperature range | -10 ~ +70 ℃ | ||||
| Operating humidity range | 20 ~ 80% RH (no condensation) | ||||
| Storage humidity range | 80% RH or less (no condensation) | ||||
| Interface | |||||
| Standard | USB Host, LAN | USB Host, USB CDC, LAN | |||
| Optional | GPIB (APS-001) RS232 / USB CDC (APS-002) | GPIB (APS-001) RS232 (APS-007) | |||
| Dimensions & Weight | |||||
| Dimensions(mm) | W | 430 | 430 | 430 | 430 |
| H | 89 | 89 | 312 | 400 | |
| D | 400 | 560 | 650 | 650 | |
| Weight | 24Kg | 38Kg | 90Kg | 128Kg | |
